Lactic acid fermentation and adsorption on PVP

Applied Biochemistry and Biotechnology - Lactic acid was produced by immobilizedLactobacillus delbreückii cells in a fixedbed reactor and then separated by a column packed with...     

基于二次剩余序列的扩散吸声体的研究

本文对基于二次剩余序列的声学结构的吸声性能进行实验研究，并定性分析了它的吸声机理．研究表明，除了结构振动所产生的损耗之外，更重要的吸收源是结构表面由于声干涉所形成的附加声阻抗的影响．     

一种纵扭复合换能器型超声马达的原理及实验研究

本文从纵扭振动换能器理论出发，计算了一种新的复合换能器型超声马达，并进行了实验研究，测出了其主要性能参数。     

The determination of an equivalent elastic modulus for bodies with cracks by boundary element method

The equivalent elastic modulus of cracked bodies with orderly distributed cracks was computed with the boundary element method. A practical self-consistent scheme has been proposed in consideration of the mutual interaction effects of the cracks. The influence of friction coefficients and orientation of cracks has been investigated. Some computational examples have been given, and the results show that the proposed method is adequate and the scheme is efficient.This project is supported by the National Natural Science Foundation of China.     

Binding energies of excitons in ionic quantum well structures

Il Nuovo Cimento D - We have calculated the binding energies of excitons in quantum well structures based on ionic semiconductors by including the electron-hole interactions with the...     

ZnSe相变、电子结构的第一性原理计算

基于第一性原理平面波赝势(PWP)和广义梯度近似(GGA)方法,对闪锌矿结构(ZB)和岩盐结构(RS)的ZnSe在0—20GPa高压下的几何结构、态密度、能带结构进行了计算研究,分析了闪锌矿结构ZnSe和岩盐结构ZnSe的几何结构.在此基础上,研究了ZnSe的结构相变、弹性常数、成键情况以及相变压强下电子结构的变化机理.结果发现:通过焓相等原理得到的ZB相到RS相的相变压强为15.3GPa,而由弹性常数判据得到的相变压强为11.52GPa,但在9.5GPa左右并没有发现简单立方相的出现;在结构相变过程中,sp3轨道杂化现象并未消除,Zn原子的4s电子在RS相ZnSe的导电性中起主要贡献.     

具有部分超结的新型SiC SBD特性分析

提出了一种具有部分超结（super junction, SJ）结构的新型SiC肖特基二极管,命名为SiC Semi-SJ-SBD结构,通过将常规SBD耐压区分为常规耐压区和超结耐压区来减小导通电阻,改善正向特性.利用二维器件模拟软件MEDICI仿真分析,研究了不同超结深度和厚度时击穿电压(V_B)和比导通电阻(R_on-sp),与常规结构的SBD比较得出,半超结结构可以明显改善SiC肖特基二极管特性,并得到优化的设计方案,选择超结宽度2< 关键词： SiC肖特基二极管 super junction 导通电阻 击穿电压     

电子辐照ITO/F46/Ag热控涂层的电学性能退化及损伤机理

对ITO/F46/Ag热控涂层进行了电子辐照地面模拟试验,探讨了其表面电阻率随电子辐照注量的退化规律,并借助扫描电镜(SEM)对其表面形貌变化进行了研究。通过SEM分析发现,涂层表面发生了严重的损伤效应,有裂纹、碎片和熔蚀现象出现。对涂层的损伤机理进行了分析,并给出了电子辐照ITO/F46/Ag热控涂层的表面碎裂损伤模型。     

DNS study of swirling intensity effect on flow pattern of a circular jet

Abstract  

The figures show the 3D flow pattern of a circular jet with different swirling intensity. Reynolds number is approximately 4300 computed based on the nozzle diameter (d), jet velocity (U), and air fluid property at 1 atm and 300 K. The overall computational domain is set to be 4 × 4 × 12 d in spanwise, height, and streamwise direction. The governing equations are the fully compressible Navier–Stokes equations, firstly differenced by eighth-order explicit scheme and then advanced temporarily by using the fourth-order explicit Runge–Kutta method. 3D characteristics non-reflecting boundary condition including transverse source contribution is imposed on all other boundaries except the inflow boundary handled by assigning fixed profiles of temperature and velocity. To ensure the simulation resolution, here over 16 million grids are employed in sum, combined with a handful of grids located at buffer zones of outflow boundaries. To correctly represent the vortex in the flow field, velocity gradient tensor invariant Q is used here. And ψ refers to the swirling intensity defined as the ratio of tangential momentum to axis momentum. As shown in velocity profile, the flow pattern of the jet changes from a close mode to a totally open mode as ψ increases from 0.4 to 1.5. Accordingly, the recirculation zone gradually moves upstream and backflow velocity is enlarged as well. It is inteseting to found that the obvious drops of the momentums in two shown directions always occur at the same position downstream, no matter how large the ψ value is. Therefore, a momentum compensatory mechanism is expected to exist in the vortex-abundant zone. With the increase of ψ value, the increased strain rate in tangential direction can induce vortex more quickly, intensifying the entrainment and velocity-attenuation, which can be observed in Q value profile.     

Design of dispersive multilayer with particle swarm optimization method

<正>We present a new and efficient method for the design of dispersive multilayer by employing a particle swarm optimization(PSO) technique.Its mathematical background is given and an adaptive PSO is realized with computer code.Two practical designing tasks are solved with this method,and the obtained results are competitive compared with other published structures.The adaptive PSO method demonstrates its merits of fast convergence and powerful global search ability,and could be used as a valuable tool for the optical thin film design.